![Universal Adaptor](/images/new-backgrounds/55857/5585711x1.webp)
Universal Adaptor
If you are mounting the JourneyMan® fixture to a small rectangular box, you will need to use the universal adaptor as shown below. Other boxes may require the adaptor adjusted differently.
If you are using a standard octagon or round box, the adaptor is probably not required.
Use these holes and the
Standard Wiring
CAUTION: If you have not already turned the power off at the breaker or fuse, do so now.
Make sure the gasket is in place before connect- ing any wires. You may find it convenient to use the wire hanger provided to hold the fixture to the junction box during the wiring process.
Connect the junction box wires to the fixture wires. Twist together and secure with wire connectors.
CAUTION: If you are not controlling additional fixtures from your JourneyMan® fixture, DO NOT connect the RED wire.
Horizontal Box
Use these holes and the
Junction
BoxWhite to
White
Green ground wire to junction
box ground wire ![Standard Wiring](/images/new-backgrounds/55857/5585711xi2.webp)
Black to
Black
RED, not |
|
used in most |
|
applications | Gasket |
Vertical Box
If the mounting holes in the fixture base still do not line up with the threaded holes in the univer- sal adaptor, you can (1) remove the adaptor and flip it over or (2) remove the other pair of knock outs in the fixture base.