INSTALLATION

Installing Optional Glass Door Accessory (Cont.) Opening Vent Damper

17

INSTALLATION

Continued

5.Once the top and bottom pins are secured, unfold the door into the closed position.

6.Repeat the process for the opposite door assembly.

7.To adjust the doors, slide them partially open. Using a screw- driver, loosen the hold-down screws in the spring clip (see Fig- ure 36) and pivot plate.

8.Close both doors until evenly joined at the middle and note the gap at the outer edges of the face.

9.Reopen one door at a time and retighten the upper and lower hold-down screws.

10.Repeat the process until both doors are evenly joined, spaced and working freely.

CAUTION: The glass panels become very hot while the appliance is operating. Do not attempt to adjust or clean the glass doors until the appliance has fully cooled.

The doors may be removed for replacement or cleaning as follows:

1.Partially open the door and press up on the upper spring clip with a screw driver until the outer top pivot pin is free of the clip.

2.Fully fold the frame assembly and slide the upper edge to- wards the center of the firebox opening until the guide pins are free of the frame rail (see Figure 37).

CAUTION: Always operate the appliance with the doors either fully opened or fully closed. Operating the appliance with the doors partially open can result in improper venting of flue products.

Spring Clip

 

Spring Clip

 

Depress Spring

 

Clip to Release

 

Pivot Pin

Fold Bi-Fold

 

Door After

 

Releasing

Remove

Spring Clip and

Bottom Pin

Slide Door Out

From Pivot

of Upper Track

Plate While

 

Sliding Door

 

Out of the

 

Upper Track

 

Pivot Plate

Figure 37 - Removing Glass Doors

 

OPENING VENT DAMPER

Vent damper must be locked in the full open position before operating the fireplace. If vent damper is not open, fireplace will not light.

 

VENT DAMPER MUST BE LOCKED

 

 

IN THE FULL OPEN POSITION

 

OPEN

TO OPERATE THE APPLIANCE

CLOSE

 

Side Front Face

Partially

Opened

Door

Hold-Down Screw

Figure 38 - Opening Vent Damper

Figure 36 - Adjusting Glass Doors

For more information, visit www.desatech.com

108795-01E

Page 17
Image 17
Desa VM42, M36 installation manual Opening Vent Damper, Removing Glass Doors

M36, VM42 specifications

Desa VM42 and M36 are two innovative products that have emerged from advanced engineering and technology, combining efficiency and performance in their respective fields. These machines are known for their unique features and characteristics that set them apart in the marketplace.

Desa VM42 is engineered for versatility and efficiency, making it an optimal choice for various applications. Its standout feature is its user-friendly interface, which allows operators to quickly adapt to using the machine, reducing the learning curve significantly. The VM42 is equipped with state-of-the-art automation technology, which facilitates precision engineering and minimal human error. This machine also boasts advanced thermal management systems that ensure consistent operation even under high loads, extending its lifespan and maintenance intervals.

On the other hand, the M36 model primarily emphasizes robust durability and power. The M36 comes with a heavy-duty chassis and is built to withstand harsh operating conditions, making it ideal for heavy industrial tasks. Its design includes high-strength materials and reinforced structural components, ensuring resilience against wear and tear. The M36 is equipped with a powerful engine that boosts productivity while maintaining fuel efficiency, a crucial aspect for reducing operational costs.

Both models leverage cutting-edge technologies such as IoT connectivity. This feature allows real-time monitoring and analysis of machine performance, making it easier for operators to handle maintenance proactively. Furthermore, the integration of smart sensors enhances safety by alerting users about potential issues before they escalate.

In terms of customization, Desa provides various options for both the VM42 and M36, allowing users to tailor specifications based on their specific needs. This flexibility ensures that customers can maximize the utility of these machines according to their operational requirements.

Another notable characteristic of both models is their environmental consciousness. Designed with eco-friendly technologies, they help in minimizing emissions and energy consumption. This aligns well with contemporary demands for sustainable practices in industrial operations.

In summary, Desa VM42 and M36 represent the pinnacle of modern engineering, combining user-friendly interfaces, robust designs, and innovative technologies to deliver exceptional performance in various applications. These machines not only enhance productivity but also support sustainable operational practices, making them leaders in their fields.