Desa MSVFBNR Series Stove Cavity Assembly, Sun Valley Stove Company, Installation, Continued

SUN VALLEY STOVE COMPANY

VENT-FREE NATURAL GAS STOVE HEATER

INSTALLATION

Continued

STOVE CAVITY ASSEMBLY

1.Lift off corrugated box enclosing stove body crating.

2.Remove all screws fastening the wood frame enclosure. Spread wood frame open and lift away from plastic-bagged stove body. The bottom pieces of pallet wood will remain bolted to the stove body.

3.Remove plastic bag from stove body.

4.Remove back panel from stove (see Figure 5). Use an adjustable wrench or a 10 mm socket. Remove six (6) bolts and washers. Keep bolts and washers to reattach back panel later.

5.Remove all contents from inside stove cavity. Contents include:

(1) - Stove bottom

(4)- Legs (includes leg leveler bolts)

(1)- Bottom door

(1)- Top grate

(1)- Hardware kit bag with fasteners

6.Carefully lay stove body on back to at- tach bottom components to stove body (see Figure 6). Rest stove on drop cloth or blanket to avoid scratching stove edges.

Product Identification

Label

Bolt

Back Stove

Panel

Figure 5 - Removing Back Panel
	Top of Stove Unit
	Front of
	Stove Unit	Top of
Front of		Stove
Stove Unit		Unit
	Pallet Wood
Drop Cloth/	Bolted to
Blanket	Stove Body
	Bottom

Figure 6 - Laying Down Stove On Side

7. Remove remaining pallet wood attached		Front
to bottom of stove body (see Figure 7).	Bolt	Pallet
Use an adjustable wrench to remove bolts.
		Wood
CAUTION: Cast iron is brittle.
Do not overtighten bolts or		Bottom Of
screws during assemlby.
		Stove Unit

8.Fasten each leg to stove with four (4) M8 x 1.25 - 20mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figures 8 and 9). Use an adjustable wrench or a 12mm socket.

9.Fasten stove bottom to stove with four

(4) M6 x 1 - 25mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figures 8 and 10). Use an adjustable wrench or a 10mm socket.

Pallet

Wood

Figure 7 - Removing Pallet Wood From The Bottom of The Stove

Door Hinge Step	Front	Door Catch Bolt
		With Adjustable
Bolt Hole		Hex Nuts Hole
Leg		Leg
Hole		Hole
	Stove	Bottom Of
		Stove Unit
	Bottom
	Hole
Leg		Leg
Hole		Hole

Figure 8 - Locating Threaded Holes for Stove Bottom, Legs, and Door Attachment

For more information, visit www.desatech.com 8 105985