Desa MSVFBP Product Identification, Product Features, Local Codes, Operation, Safety Pilot

OWNER’S MANUAL

PRODUCT

IDENTIFICATION

Stove Body

One Piece

Log Set

Inside

Stove

Cavity

ON	HI
OFF
			O
REMOTE	LO	NO	F
			F
		TOL IP

Piezo Ignitor		Selector	Control Knob
		Switch	Flame
Stove Door	Gas Log Heater		Adjustment
(Shown in the			Knob
	Base Assembly
open position)

Figure 1 - Typical Stove Cabinet Model (Shown with Model MSVFBPR Heater)

PRODUCT

FEATURES

OPERATION

This heater is clean burning. It requires no outside venting. There is no heat loss out a vent or up a chimney. Heat is generated by realistic, dancing yellow flames. This heater is designed for vent-free operation. State and local codes in some areas prohibit the use of vent-free heaters.

SAFETY PILOT

This heater has a pilot with an Oxygen Depletion Sensing (ODS) safety shutoff system. The ODS/pilot is a required feature for vent-free room heaters. The ODS/pilot shuts off the heater if there is not enough fresh air.

PIEZO IGNITION SYSTEM

This heater has a piezo ignitor. This system requires no matches, batteries, or other sources to light heater.

LOCAL CODES

Install and use heater with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANS Z223.1, also known as NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

105986 3 For more information, visit www.desatech.com