Desa PH30EDI Storage, Preventative, Maintenance, Schedule, Continued, To Stop Heater, How Often

OPERATION	Flame-Out
Continued
	Control
	Reset Button
	(Fan Guard
	Removed)

Figure 8 - Flame-Out Control Reset Button, 150,000 BTU/Hr Model

To Stop Heater

1. Unplug power cord from outlet.

To Restart Heater

1.Wait 2 minutes after stopping heater.

2.Repeat steps under To Start Heater, page 7.

	STORAGE 1.	Drain fuel tank.
		Note: Some models have drain plug on underside of fuel tank. If so, remove
		drain plug to drain all fuel. If heater does not have drain plug, drain fuel
		through fuel cap opening. Be sure all fuel is removed.
2.		Replace drain plug if used.
3.		Add 4 liters of clean kerosene to fuel tank.
4.		Attach fuel cap.
5.		Move heater forwards and backwards to stir fuel.
6.		Remove fuel cap or drain plug and drain fuel tank. Be sure all fuel is removed.
7.		Replace fuel cap or drain plug. Properly dispose of old and dirty fuel.
8.		Store heater in dry place. Make sure storage place is free of dust and corrosive
		fumes.
	IMPORTANT: Do not store kerosene over summer months for use during next
	heating season. Using old fuel could damage heater.
PREVENTATIVE
			! WARNING
MAINTENANCE
		Never service heater while it is plugged in, operating, or
	SCHEDULE	hot. Severe burns and electrical shock can occur.
	Item		How Often	How To
	Fuel tank		Flush every 150-200 hours	See Storage above.
			of operation or as needed.
	Air output and		Replace every 500 hours of	See Air Output, Air Intake,
	lint filters		operation or once a year.	and Lint Filters, page 14.
	Air intake		Wash and dry with soap and	See Air Output, Air Intake,
	filter		water every 500 hours of	and Lint Filters, page 14.
			operation or as needed.
	Fuel filter		Clean twice a heating season	See Fuel Filter, pages 10
			or as needed.	and 11.
				Continued
8

099800