Desa RGA 2-72 Safety Information, Local Codes, Unpacking, Product Identification, Continued

SAFETY INFORMATION

Continued

11. Do not run log set

•where flammable liquids or vapors are used or stored

•under dusty conditions

12.Do not burn solid fuel in the fireplace after installing the log set. Do not use this log set to cook food or burn paper or other objects.

13.Log set becomes very hot when in use. Keep children and adults away from hot surface to avoid burns or clothing ignition. Log set will remain hot for a time after shutdown. Allow surface to cool before touching.

14.Carefully supervise young children when they are in the room with log set.

15.Do not use appliance if any part has been exposed to or under water. Immediately call a qualified service technician to inspect the room appliance and to replace any part of the control system (if using GA9050A or GA9150A) and any gas control which has been under water.

16.To help prevent breakage, new logs must be broken-in (see Curing Logs page 10).

17.Turn log set off and let cool before servicing, installing, or re- pairing. Only a qualified service person should install, service, or repair log set.

18.Provide adequate clearances around air openings.

SAFETY INFORMATION

PRODUCT IDENTIFICATION

LOCAL CODES

UNPACKING 3

OPTIONAL PRODUCT FEATURES

LOCAL CODES

Install and use log set with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANSI Z223.1/NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

UNPACKING

CAUTION: Do not remove the data plates from the burner pan. The data plates contain important product information.

1.Remove logs, hearth kit, pan materials, and hardware from car- ton.

2.Remove all protective packaging applied to logs and base for shipment.

3.Check all items for any shipping damage. If damaged, promptly inform dealer where you bought the product.

PRODUCT IDENTIFICATION

Grate Steps

Grate

Burn-	Burner
er Pan	Clamp
	Burner	Burner Inlet
	Manifold
		Fitting
Figure 1 - Product Identification (Dual Burner Shown)

Hearth Kit Model _________________________

Serial Number ___________________________

Log Set Model ___________________________

OPTIONAL PRODUCT FEATURES

ON/OFF SAFETY VALVE/PILOT KIT AND PRO- PANE/LP CONVERSION

An optional valve/safety pilot kit with a piezo ignitor is available for this appliance. This system requires no matches, batteries, or other sources to light. You must use this optional system for LP conversion. See Accessories, page 15.

REMOTE CONTROL READY (MILLIVOLT) SAFETY VALVE/PILOT KIT

An optional millivolt valve/safety pilot kit with a piezo ignitor is avail- able for this appliance. This system requires no matches, batteries, or other sources to light. This system may be connected to a wall switch or hand-held wireless remote control. See Accessories, page 15.

REMOTE CONTROL ACCESSORIES

There is an optional hand-held ON/OFF remote control that can be purchased separately for this log set. You must use the millivolt valve/safety pilot kit to use remote accessories with this appliance. See Accessories, page 15.

A wall switch is also available for this appliance. You must use the millivolt valve/safety pilot kit to use the wall switch with this appliance. See Accessories, page 15.

For more information, visit www.desatech.com

115043-01