INSTALLATION

Hearth Kit Assembly and Installation (Cont.)

Optional GA9050A ON/OFF Safety Valve/Pilot Kit Assembly

7

INSTALLATION

Continued

Natural Gas Installation

1.Thread the gas control valve onto the burner inlet fitting (see Figure 8). Use thread sealant on the male threads of the burner inlet fitting. Hold the burner inlet fitting with a wrench to pre- vent overtightening the connection to the burner. Make sure the control rod is facing the front (see Figure 8).

2.Attach the pilot gas line to the pilot outlet of the gas control valve and tighten. Connect the thermocouple to the rear of the gas control valve. See Figure 9. Do not overtighten. If using propane/LP gas, see Changing Pilot Orifice, page 8.

3.Install the inlet fitting into the inlet opening of the gas control valve (see Figure 10). Use thread sealant on the male pipe threads.

4.Place the burner pan assembly in the center of the fireplace floor. Make sure the front of pan faces forward.

5.Thread the gas supply fitting to the fireplace gas supply pipe. Adjust to most convenient position.

6.Install the gas connector tube to the gas supply fitting. Carefully shape tube to attach to adapter fitting. Be careful not to cause kinks in tube.

7.Test for leaks following instructions under Testing Burner for Leaks, page 9.

8.Retighten and adjust the location of the gas control as neces- sary. The gas control should be level, with the control rod to the front.

9.Install cover to burner pan using screws provided.

10.Install thermocouple, pilot, and ignitor onto valve cover as shown in Figure 11. Use the provided screws.

11.Push the control rod extension onto the “D” shaped control rod through the center hole in the cover.

12.Install the position decal and control knob making sure to align the marks with the correct stop positions of the gas control. Pilot position will allow the knob to push in about 1/2". Align the decals in the pilot position.

Burner Inlet Fitting

Gas Control

Valve

Thermocouple and Line

Pilot and Line

Gas Control Valve

Figure 9 - Gas Control Valve with Thermocouple and Pilot

Gas Con- nector Tube

 

Gas Inlet

Gas Control

Fitting

Inlet

Valve

Opening

Figure 10 - Installing Inlet Fitting and Gas Connector Tube

Thermocouple

Screw

Ignitor

Pilot

Valve Cover

Burner Pan As- sembly

Figure 8 - Installing Gas Control Valve

Control Rod

Piezo Ignitor

Control Rod

Control Extension

Knob

Figure 11 - Installing Cover, Control Knob, and Piezo Ignitor

For more information, visit www.desatech.com

115043-01

Page 7
Image 7
Desa RGA 2-72 installation manual Natural Gas Installation

RGA 2-72 specifications

Desa RGA 2-72 is a notable residential development that epitomizes modern living through the integration of innovative technologies and sustainable features. This project is designed to cater to the diverse needs of families while promoting a sense of community and environmental responsibility.

One of the main features of Desa RGA 2-72 is its focus on eco-friendly living. The development incorporates green building materials and energy-efficient designs that minimize environmental impact. Each unit is equipped with solar panels, enabling residents to harness renewable energy, thus reducing reliance on traditional energy sources and lowering utility bills. This commitment to sustainability extends to rainwater harvesting systems, which help to conserve water and reduce waste.

The architectural design of Desa RGA 2-72 reflects contemporary aesthetics combined with functional layouts. The homes are designed with open-concept floor plans that maximize natural light and create spacious living environments. Large windows and high ceilings enhance the sense of space and openness, providing a comfortable and inviting atmosphere for residents.

Another key characteristic of this development is the incorporation of smart home technologies. Each unit comes equipped with smart thermostats, lighting controls, and security systems that can be easily managed through a mobile app. This automation not only enhances convenience but also contributes to energy savings, as residents can monitor and control their energy usage remotely.

Community amenities are also a significant aspect of Desa RGA 2-72. The development features landscaped green spaces, playgrounds for children, and recreational facilities designed to foster social interaction among residents. Walking and biking paths encourage outdoor activities, promoting a healthy lifestyle while strengthening community bonds.

Accessibility is another advantage of this development. Located near essential services, including schools, shops, and healthcare facilities, residents enjoy the convenience of urban living without sacrificing the tranquility of suburban life.

In conclusion, Desa RGA 2-72 stands out as a model for modern, eco-friendly residential living. With its focus on sustainability, smart technologies, and community-oriented design, it offers an attractive option for families seeking a harmonious blend of comfort, convenience, and environmental responsibility. This development not only meets the demands of contemporary living but also sets a standard for future residential projects.