Desa SVYD18NRA/PRA SERIES installation manual Stove Cavity Assembly

INSTALLATION

Continued

Ceiling

Front

48"View

Minimum

12"	12"
Side Minimum	Minimum	Side
Wall		Wall

Back Wall

		6 "
		Minimum
	12 "	12 "
	Minimum	Minimum
Side Wall			Side Wall
	Top View
		Front of
		Stove Unit
Corner		Wall
		6 "
		Minimum
Wall	6 "	Ceiling
	Minimum	Side
		View
		48"
		Minimum
		6"	Back
		Minimum
			Wall

Front of

Stove Unit

Floor

Figure 4 - Minimum Clearance to Walls and Ceiling (Stove May Vary Depending on Model)

STOVE CAVITY ASSEMBLY

1.Lift off corrugated box enclosing stove body crating.

2.Remove all screws fastening the wood frame enclosure. Spread wood frame open and lift away from plastic-bagged stove body. The bottom pieces of pallet wood will remain bolted to the stove body.

3.Remove plastic bag from stove body.

4.Remove all contents from inside stove cavity. Contents include:

(4)- Legs (include leg leveler bolts)

(1)- Bottom door

(3)- Top grates

(1)- Hardware kit bag with fasteners

5.Carefully lay stove body on back to attach bottom components to stove body (see Fig- ure 5). Rest stove on drop cloth or blanket to avoid scratching stove edges.

6.Remove remaining pallet wood attached to bot- tom of stove body (see Figure 6). Use an adjust- able wrench or 12mm socket to remove bolts.

7.Fasten each leg to stove with four (4) M8 x 1.25 - 20mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figures 7 and 8, page 10). Use an adjustable wrench or a 12mm socket.

8.Attach stove door by inserting step bolt through door hinge pivot hole and into threaded hole in stove body (see Figure 7 and Figure 10, page 10). Use an adjustable wrench or a 12mm socket to fasten step bolt. Tighten step bolt until snug. Make sure door moves freely.

	Top of
Front of	Stove Unit		Top of
Stove		Front of
			Stove
Unit		Stove Unit
			Unit
Drop
Cloth/
Blanket

Pallet Wood Bolted to

Stove Body Bottom

Figure 5 - Laying Down Stove On Side

(Stove Style May Vary Depending on

Model)

Front	Pallet
Bolt	Wood

	Bottom
Pallet Wood	Of Stove
	Unit

Figure 6 - Removing Pallet Wood From

The Bottom of The Stove

113084-01A www.desatech.com 9