OWNER’S MANUAL
INSTALLATION
Continued
INSTALLING LOGS
WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.
CAUTION: Do not remove the metal data plates attached to the heater base assembly. The data plates contain important warranty information.
Each log is marked with a number. These numbers will help you identify the log when installing. It is very important to install these logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.
1.Place front log (#1) on top of the grate. Make sure the notches in the bottom of the log fit over the grate prongs (see Figure 22). Push back of log flush with metal grate bar.
2.Rest middle log (#2) behind metal posts on front burner. Make sure the grooves in the bottom of the log fit over the grate. Bring the log forward next to the metal posts (see Figure 23).
3.Slide the grooves in the back of the rear log (#3) against the rear grate prongs. Make sure the peg on the log is on top (see Figure 24).
4.Place the crossover log (#4) on the rear log and the middle log. Make sure the peg on the rear log is in the hole in the bottom of the crossover log. The cross- over log should fit in the cutout of the middle log (see Figure 25).
5.Install fireplace screen by slipping notches of fireplace screen over screws on front of fireplace (see Figure 26).
Front Log (#1)
Notch
Grate
Prongs
Metal Grate Bar
Figure 22 - Installing Front Log (#1)
Middle Log (#2)
Groove
Metal
Post
Groove
Grate
Metal Post
Figure 23 - Installing Middle Log (#2)
Groove | Peg | |
in Back | ||
of Log | Rear Log | |
(#3) | ||
| ||
Grate Prong |
| |
Rear |
| |
Burner | Groove | |
| in Back | |
| of Log | |
| Grate | |
| Prong |
Crossover
Log (#4)
CutoutHole
Peg
Figure 25 - Installing Crossover Log (#5)
Notches
Screws for
Mounting
Screen
Figure 26 - Installing Fireplace Screen
WARNING: You must operate this fireplace with the fireplace screen in place. Make sure fire- place screen is in place before running fireplace.
Figure 24 - Installing Rear Log (#3)
107171 | 13 | For more information, visit www.desatech.com |
