![NOTICE](/images/new-backgrounds/44542/4454229x1.webp)
INSTALLING
Continued
Mo2
Figure 12 - Attaching Base Assembly to Fireplace Floor
CONNECTING TO GAS SUPPLY
NOTICE
A qualified service person must connect heater to gas supply.
Follow all local codes.
CAUTION
Never connect heater directly requires an external regulator regulator between the heater
to the propane supply. This heater (not supplied). Install the external
and propane supply.
Installation Items Needed
Before installing heater, make sure you have the items listed below.
• | external | regulator | (supplied by | • test gauge connection * | |
| installer, | see page | 16) | • | sediment trap |
• piping (check local codes) | • | tee joint | |||
• | sealant | (resistant | to propaneJLP gas) | • | pipe wrench |
• manual shutoff valve * |
|
|
*An A.G.A.
manual shutoff valve from your dealer. See Accessories, page 33.