INSTALLATION
Continued
STOVE CAVITY ASSEMBLY
1. | Lift off corrugated box enclosing stove |
| body crating. |
2. | Remove all screws fastening the wood |
| frame enclosure. Spread wood frame |
| open and lift away from |
| stove body. The bottom pieces of pal- |
Bolt
Product | Back Stove Panel | |
Identification Label | ||
|
| let wood will remain bolted to the stove |
| body. |
3. | Remove plastic bag from stove body. |
4. | Remove back panel from stove (see |
| Figure 5). Use an adjustable wrench or |
| a 10 mm socket. Remove six (6) bolts |
| and washers. Keep bolts and washers |
| to reattach back panel later. |
5. | Remove all contents from inside stove |
| cavity. Contents include: |
(1) - Stove bottom
(4)- Legs (Amity models include leg leveler bolts)
Figure 5 - Removing Back Panel
Top of Stove Unit
Front of
Stove Unit
Drop Cloth/
Blanket
Front of
Stove UnitTop of
Stove
Unit
Pallet Wood
Bolted to
Stove Body
Bottom
(1)- Bottom door
(1)- Top grate
(1)- Hardware kit bag with fasteners
6.Carefully lay stove body on back to attach bottom components to stove body (see Figure 6). Rest stove on drop cloth or blanket to avoid scratching stove edges.
7.Remove remaining pallet wood at- tached to bottom of stove body (see Figure 7). Use an adjustable wrench to remove bolts.
8.Fasten each leg to stove with four (4) bolts. Use a flat screw driver to tighten bolt to leg. Thread bolt in tapped holes on stove body (see Figure 8 and Figure 9, page 9).
Figure 6 - Laying Down Stove On Back (Stove Style May Vary Depending on Model)
Front
Bolt | Pallet | |
Wood | ||
|
Bottom Of
Stove Unit
Pallet
Wood
Figure 7 - Removing Pallet Wood From The Bottom of The Stove
Door Hinge Step |
| Door Catch Bolt |
Bolt Hole | Front | With Adjustable |
| Hex Nuts Hole | |
|
| |
Leg |
| Leg |
Hole |
| Hole |
Bottom Of
StoveStove Unit
Bottom
Holes
Leg | Leg |
Hole | Hole |
Figure 8 - Locating Threaded Holes for Stove Bottom, Legs, and Door Attachment (Appearance May Vary Depending on Model)
8 | 104463 |