NOTE: Nozzles are color coded to match colored nozzles on panel.
7.Place the nozzle holder onto the panel (located on the handle assembly) and push each nozzle holder into place.
NOTE: The high pressure pump was filled with oil at the factory. The oil in the high pressure pump was designed to last the life of the pump. If there is a problem with the pump contact an Authorized Service Center.
8.Using an 11/16" wrench, remove shipping plug from pump
by turning it
counterclockwise. Discard plug.
9.Remove dipstick/oil plug from plastic bag and install into pump, tighten securely.
Risk of bursting. Use a tire pressure
gauge to check the tires pressure before each use and while inflating tires; see the tire sidewall for the correct tire pressure.
NOTE: Air tanks, compressors and similar equipment used to inflate tires can fill small tires similar to these very rapidly. Adjust pressure regulator on air supply to no more than the rating of the tire pressure. Add air in small increments and frequently use the tire gauge to prevent over inflation.
9- ENG | A16091 |