OPERATION
14.Add fresh, unleaded regular gasoline to engine fuel tank.
NEVER FILL FUEL TANK INDOORS. NEVER FILL FUEL TANK WHEN ENGINE IS RUN- NING OR HOT. DO NOT SMOKE WHEN FILL- ING FUEL TANK.
NEVER FILL FUEL TANK COMPLETELY. FILL TANK TO 1/2" BELOW BOTTOM OF FILLER NECK TO PROVIDE SPACE FOR FUEL EX- PANSION. WIPE ANY FUEL SPILLAGE FROM ENGINE AND EQUIPMENT BEFORE START- ING ENGINE.
NEVER RUN ENGINE INDOORS OR IN EN- CLOSED, POORLY VENTILATED AREAS. ENGINE EXHAUST CONTAINS CARBON MONOXIDE, AN ODORLESS AND DEADLY GAS.
TYPICAL HOOK-UP
Your pressure washer hookup should resemble this diagram.
|
| Pressure Washer | |
Chemical |
| Wand | |
|
| ||
Garden | Chemical | Hi- | |
Hose | |||
Hose | |||
| Pressure | ||
|
| ||
|
| Hose |
PRE-START CHECKLIST
Once you reach this point, ensure you have completed the following:
All safety instructions read and understood? All hose connections are tightened and free of any kinks, damage, or leaks?
Correct amount of engine oil and gasoline added to engine?
Correct amount of oil in the pump? Nozzle installed in end of wand?
3Water supply (garden hose) turned on?
All operation instructions read and under- stood?
If you can say "yes" to the items on the
STARTING YOUR PRESSURE WASHER
NOTE: Make sure water supply is turned on.
Never turn water supply off while pressure washer engine is running or damage to pump will result.
1. Move fuel valve lever to ON position.
Fuel
Valve
Lever
ON
2.Move choke control lever to CLOSED position.
NOTE
To restart a warm engine, move choke control to ON position.
Choke Control
Lever
ON |
CLOSED
D20249 | 12 — ENG |