OPERATING PROCEDURES (cont'd)
Quick Connect – Use the 0°, 15°, 25°, and 40° nozzles for high
1.Shut off the pressure washer and turn off the water supply.
2.Pull trigger on gun handle to relieve any water pressure.
3.Pull quick connect coupler back and remove
4.Pull quick connect coupler back and insert nozzle.
5.Release quick connect coupler and insure nozzle is secure.
To siphon chemicals/soaps, refer to low pressure operation below. Chemicals/soaps will not siphon in high pressure setting.
NOTE: On the Dual and Quick Connect wands the different degree nozzles will change the fan spray to be used in different applications.
0° nozzle – Used for a pinpoint stream. This nozzle stream is very powerful and covers a very small area of cleaning. This nozzle should only be used on surfaces that can withstand this high pressure such as metal or concrete.
15° and 25° nozzle – Used for less powerful stream which can cover a wider area. This nozzle is also very powerful and should only be used on surfaces that can withstand this high pressure.
40° nozzle – Used for the least powerful stream and covers a wide area of cleaning. This nozzle should be used for most general cleaning jobs.
Quick Connect with Nozzles
Figure 10
Quick Connect Coupler
Figure 11
12 — ENG
