5.Connect wand to gun. Tighten securely.
6.Attach high pressure hose to gun. Tighten securely.
NOTE: The high pressure pump was filled with oil at the factory. There is no need to add oil at this time, see the Maintenance section of this manual for Maintenance information.
7.Roll the unit off the carton and discard carton.
Risk of bursting. Use a tire pressure gauge to check the tires pressure
before each use and while inflating tires; see the tire sidewall for the correct tire pressure.
NOTE: Air tanks, compressors and similar equipment used to inflate tires can fill small tires similar to these very rapidly. Adjust pressure regulator on air supply to no more than the rating of the tire pressure. Add air in small increments and frequently use the tire gauge to prevent over inflation.
9- ENG | A20118 |
