DeWalt manual Adapter Configuration 3.4.9 Tools, Corinex AV200 Powerline Ethernet Wall Mount

Adapter Configuration

3.4.9 Tools

Clicking on hardware reset button will restart your adapter. The configuration will remain the same, and any changes made in the Network Configuration section will be applied. This means that if you’ve changed the IP address, the adapter will restart with the new IP address.

Factory reset will restore the adapter‘s default settings. The system will ask for the password, which is “betera“. Then click OK. The adapter will restart with the following configuration:

-IP address = 10.10.1.69

-Configuration interface password = paterna

-Factory reset password = betera

- Device type is Automatic EP/AP 27

-Network Identifier is blank

-No encryption and no VLAN settings

Corinex AV200 Powerline Ethernet Wall Mount