DeWalt AV200 Troubleshooting Guide, The POWER LED is off, The VPI LED is off, The AP LED is off

Troubleshooting Guide

6Troubleshooting Guide

The Corinex AV200 Powerline Ethernet Wall Mount has been designed to be a reliable and easy-to-use network connection device. Please refer to the list below to aid in troubleshooting or visit www.corinex.com/retail and go to the appropriate section for information on your product. There you will find news, manuals and software updates, as well as frequently asked questions (FAQ).

The POWER LED is off.

1.Make sure the Wall Mount adapter is properly plugged directly into the electrical outlet, and that the outlet has power.

2.Try another outlet.

The VPI LED is off.

1.Make sure the wall mount adapter is plugged directly into the outlet, rather than into a surge suppressor or power strip. The current model of the Corinex AV200 Powerline Ethernet Wall Mount is not designed to function through a surge suppressor.

The AP LED is off. 47

1.Make sure the wall mount adapter is configured as fixed AP. For this reason network identifier has to be defined.

Weak network connection

1.If any power-draining devices are being used, such as hair dryers, try plugging them into a Powerline Noise Filter (sold separately).

2.Your network may be spread across different circuits. Try plugging in a Corinex PowerPhase Coupler to bridge the Powerline signal across the phases in your home or office (sold separately, US only).

3.Try another outlet.

To avoid personal injury and damage to the system:

1.The principal method to disconnect the device completely from the electrical power network (mains) is to unplug the power cord from the mains socket.

2.Never install the unit in wet areas or next to radiators/heaters.

3.Never use the unit outside.

4.Unplug the unit during severe storms.

5.Never open the equipment enclosure.

To verify that your equipment is connected and working correctly, use the standard Ping utility. In Windows, click on menu Start -> Run, then type the command ping IPADDRESS -t, where IPADDRESS is the IP address of the computer to

Corinex AV200 Powerline Ethernet Wall Mount