Trigger Switch (Fig. 1)

To start the tool, depress the trigger switch (N). To turn the tool off, release the trigger switch. Keep hands and material from wheel until it has coasted to a stop.

To prevent unauthorized use of tool, install a standard padlock (not included) into the padlock hole (O) located in the trigger.

Material Clamping and Supporting

•Angles are best clamped and cut with both legs resting against base.

•A spacer block slightly narrower than the workpiece can be used to increase wheel utilization (Fig. 2).

•Long workpieces must be supported by a block so it will be level with top of base (Fig. 3). The cut off end should be free to fall downward to avoid wheel binding.

Vise Operation (Fig. 4)

The vise (F) has a quick-travel feature. To release the vise when it is clamped tightly, turn the crank (H) counterclockwise one or two times to remove clamping pressure. Lift vise lever (I) up. Pull crank assembly out as far as desired. Vise may be pushed forward into work without cranking. Lower vise lever (I) then tighten vise (F) on work by using crank (H).

Fence Operation (Fig. 5, 6)

WARNING: Turn off and unplug the tool before making any adjustments or removing or installing attachments or accessories. Be sure the trigger switch is in the OFF position.

The fence (E) can be adjusted two ways: to change desired cutting angle and to change spacing between the fence and vise.

FIG. 5

G

 

Q

F

R

E

TO CHANGE THE DESIRED CUTTING ANGLE

Use the wrench provided to loosen (do not remove) the two fence

English

FIG. 4

E

Q

FORWARDI

F

H

bolts (Q). Align the desired angle indicator line with the slot line (R) in the base (D). Securely tighten both fence bolts before use.

For more accurate square cuts, disconnect the power supply, loosen the two fence bolts, push arm down until wheel extends into base. Place a square against the wheel and adjust fence against the square. Securely tighten both fence bolts before use.

When making a miter cut, the vise (F) may not clamp securely, depending on the thickness of the workpiece and the miter angle. Other aids (such as spring, bar or C-clamps) will be necessary to secure the workpiece to the fence when making these cuts.

6

Page 6 Page 8
Page 7
Image 7
DeWalt D28700 instruction manual Trigger Switch Fig, Material Clamping and Supporting, Vise Operation Fig, Fence Operation
Page 6 Page 8

D28700 specifications

The DeWalt D28700 is a robust and powerful portable cut-off saw designed for heavy-duty use in various applications. Known for its efficiency and precision, the D28700 has become a favorite among professionals and DIY enthusiasts alike. One of its standout features is its 14-inch carbide-tipped blade, which allows for quick, clean cuts through various materials, including metal, rebar, and conduit. This versatility makes it ideal for construction, electrical, and plumbing projects.

A noteworthy aspect of the D28700 is its impressive motor. Equipped with a high-performance 15-amp motor, it delivers a remarkable 3,800 RPM, ensuring that even the toughest materials can be sliced with ease. This robust motor also contributes to its reliability and longevity, making it a worthwhile investment for professionals who require consistent performance.

Another significant feature of the D28700 is its integrated dust chute. This design element aims to enhance user experience by minimizing debris buildup during cutting. By effectively channeling dust away from the cut line, the dust chute helps maintain visibility and improves overall work efficiency. This is especially important in professional environments where precision and cleanliness are paramount.

The D28700 also boasts an ergonomic design, promoting user comfort and reducing fatigue during extended use. It features soft-grip handles that enhance grip and control, ensuring stability while operating. Furthermore, the saw's balanced construction increases maneuverability, making it easier to position and operate in tight spaces.

Safety is a crucial consideration for any power tool, and the D28700 does not compromise in this regard. It is equipped with a lock-off switch that helps prevent accidental starts, ensuring maximum safety while handling the tool. The sturdy guarding system also provides additional protection against flying debris, offering peace of mind during operation.

In conclusion, the DeWalt D28700 is a versatile and powerful cut-off saw that caters to demanding needs. Its combination of a high-performance motor, ergonomic design, dust management system, and safety features make it an essential tool for any serious tradesperson or DIY project. With its reliability and efficiency, the D28700 stands out in the competitive landscape of power tools, providing users with the confidence to tackle a wide range of cutting tasks.
Top Page Image Contents