PROCEDURE FOR PERMANENT MOUNTING

1.Mark through the holes in the base (D) and drill two holes, 5/16" (7.94 mm) diameter, through the mounting surface.

2.Use 1/4" (6.35 mm) fasteners to securely mount base to mounting surface.

CRADLE MOUNTING (FIG. 9)

FIG. 9

 

1. Cut two boards approximately 20" long x 2" high x 4" wide (508 x 50.8 x 101.6 mm).

2. Place the chop saw at desired work location.

3. Place boards tightly along side and nail to work surface.

Operation Tips for

More Accurate Cuts

• Allow the wheel to do the cutting. Excessive force will

cause the wheel to glaze reducing cutting efficiency and/or to deflect causing inaccurate cuts.

Properly adjust fence angle.

Make sure material is laying flat across base.

Properly clamp material to avoid movement and vibration.

MAINTENANCE

Motor Brush Inspection and

Replacement (Fig. 10)

WARNING: Turn off and unplug the tool. Be sure the trigger switch is in the OFF position.

Brushes should be regularly inspected for wear. To inspect brushes, unscrew the two end cap screws (W) and remove end cap

(X). Remove brush cap (Z). Brushes (Y) should slide freely in brush

box. If brushes are worn down to .3" (8 mm) as shown in Figure 10 they should be replaced. To reinstall, push new brush back into brush box. If replacing existing brush, maintain same orientation as when removed. Replace the brush cap (do not overtighten). Replace end cap and two screws. Tighten securely.

FIG. 10

Z

Y

.3"

Y

 

(8 mm)

 

X

W

Cleaning

Blowing dust and grit out of the main housing by means of an air hose is recommended and may be done as often as dirt is seen collecting in and around the air vents. Always wear proper eye and respiratory protection.

Repairs

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

NOTE: Unit may be converted to a 3-wire twist lock cord set at an authorized service center.

English

8

Page 9
Image 9
DeWalt D28700 Operation Tips for More Accurate Cuts, Maintenance, Motor Brush Inspection Replacement Fig, Cleaning

D28700 specifications

The DeWalt D28700 is a robust and powerful portable cut-off saw designed for heavy-duty use in various applications. Known for its efficiency and precision, the D28700 has become a favorite among professionals and DIY enthusiasts alike. One of its standout features is its 14-inch carbide-tipped blade, which allows for quick, clean cuts through various materials, including metal, rebar, and conduit. This versatility makes it ideal for construction, electrical, and plumbing projects.

A noteworthy aspect of the D28700 is its impressive motor. Equipped with a high-performance 15-amp motor, it delivers a remarkable 3,800 RPM, ensuring that even the toughest materials can be sliced with ease. This robust motor also contributes to its reliability and longevity, making it a worthwhile investment for professionals who require consistent performance.

Another significant feature of the D28700 is its integrated dust chute. This design element aims to enhance user experience by minimizing debris buildup during cutting. By effectively channeling dust away from the cut line, the dust chute helps maintain visibility and improves overall work efficiency. This is especially important in professional environments where precision and cleanliness are paramount.

The D28700 also boasts an ergonomic design, promoting user comfort and reducing fatigue during extended use. It features soft-grip handles that enhance grip and control, ensuring stability while operating. Furthermore, the saw's balanced construction increases maneuverability, making it easier to position and operate in tight spaces.

Safety is a crucial consideration for any power tool, and the D28700 does not compromise in this regard. It is equipped with a lock-off switch that helps prevent accidental starts, ensuring maximum safety while handling the tool. The sturdy guarding system also provides additional protection against flying debris, offering peace of mind during operation.

In conclusion, the DeWalt D28700 is a versatile and powerful cut-off saw that caters to demanding needs. Its combination of a high-performance motor, ergonomic design, dust management system, and safety features make it an essential tool for any serious tradesperson or DIY project. With its reliability and efficiency, the D28700 stands out in the competitive landscape of power tools, providing users with the confidence to tackle a wide range of cutting tasks.