English
AIR INTAKE FILTER
The filter (J) is designed to clean air entering the pump. To ensure the pump continually receives a clean, cool, and dry air supply the filter must always be clean and the filter intake must be free from obstructions.
Motor Overload Protector
The motor has a thermal overload protector. If the motor overheats
Grounding Instructions
Warning: Risk of Electrical Shock. In the event of a short circuit, grounding reduces the risk of shock by providing an escape wire for the electric current. This air compressor must be properly grounded.
The portable air compressor is equipped with a cord having a grounding wire with an appropriate grounding plug.
for any reason, the overload protector will shut off the motor. The motor must be allowed to cool down before restarting. To restart:
1.Set the Auto/Off lever to Off and unplug unit.
2.Allow the motor to cool.
3.Plug the power cord into the correct branch circuit receptacle.
4.Set the Auto/Off lever to AUTO position.
INSTALLATION
1.The cord set and plug (M) with this unit contains a grounding pin (L). This plug MUST be used with a grounded outlet (K).
IMPORTANT: The outlet being used must be installed and grounded in accordance with all local codes and ordinances.
M
K 
L
Assembly
Installing Hoses
Warning: Risk of unsafe operation. Firmly grasp hose in hand when installing or disconnecting to prevent hose whip.
1.Ensure regulated pressure gauge reads 0 psi.
2.Grasp the hose at the quick connect plug and push the plug into the quick connect body (E). Coupler will snap into place.
3.Grasp the hose and pull to ensure coupler is seated.
Disconnecting Hoses
Warning: Risk of unsafe operation. Firmly grasp hose in hand when installing or disconnecting to prevent hose whip.
1.Ensure regulated pressure gauge reads 0 psi.
2.Pull coupler on quick connect body back to release Quick Connect plug on hose.
2.Ensure the outlet being used has the same configuration as the grounded plug. DO NOT USE AN ADAPTER.
3.Inspect the plug and cord before each use. Do not use if there are signs of damage.
4.If these grounding instructions are not completely understood, or if in doubt as to whether the compressor is properly grounded, have the installation checked by a qualified electrician.
danger: Risk of Electrical Shock. IMPROPER GROUNDING CAN RESULT IN ELECTRICAL SHOCK.
•Do not modify the plug provided. If it does not fit the available outlet, a correct outlet should be installed by a qualified electrician.
•Repairs to the cord set or plug MUST be made by a qualified electrician.
10
