English
Draining Air Tank (Fig. 1)
Warning: Risk of unsafe operation. Risk from noise. Air tanks contain high pressure air. Keep face and other body parts away from outlet of drain. Use eye protection [ANSI Z87.1 (CAN/CSA Z94.3)] when draining as debris can be kicked up into face.
Warning: Risk from noise. Use ear protection [ANSI S12.6 (S3.19)] as air flow noise is loud when draining.
NOTE: All compressed air systems generate condensate that
3.Remove filter cover (J) from base.
4.Remove element from filter base.
5.Place new element back in filter base. Purchase replacement parts from your local dealer or authorized service center. Always use identical replacement parts.
6.Snap filter cover to filter base.
j |
accumulates in any drain point (e.g. tanks, filter, aftercoolers, dryers). This condensate contains lubricating oil and/or substances which may be regulated and must be disposed of in accordance with local, state, and federal laws and regulations.
1.Ensure Auto/Off switch is in the OFF position.
2.Place a suitable container under the drain valve (H) to catch discharge.
3.Grasp lever on drain valve.
4.Slowly rotate lever to gradually bleed air from air tank.
Warning: Risk of bursting. Drain air tank daily. Water will condense in air tank. If not drained, water will corrode and weaken the air tank causing a risk of air tank rupture.
NOTICE: Risk of property damage. Drain water from air tank may contain oil and rust, which can cause stains.
5.When air tank pressure gauge reads 10 psi, rotate valve to the fully open position.
6.Close drain valve when finished.
Checking Air Filter Element (Fig. 1)
Warning: Hot surfaces. Risk of burn. Outlet tube, pump head, and surrounding parts are very hot, do not touch. Allow compressor to cool prior to servicing.
1.Ensure Auto/Off switch (A) is in the OFF Position.
2.Allow unit to cool.
NOTICE: Risk of unsafe operation. Do not operate without air inlet filter
Accessories
Recommended accessories for use with your tool are available for purchase from your local dealer or authorized service center. If you need assistance in locating any accessory for your tool, please contact DeWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call
warning: The use of any other accessory not recommended for use with this tool could be hazardous. Use only accessories rated equal to or higher than the rating of the air compressor.
Service Information
Please have the following information available for all service calls: Model Number ____________ Serial Number _________________
Date and Place of Purchase ______________________________
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by a DeWALT factory service center, a DeWALT authorized service center or other qualified service personnel. Always use identical replacement parts.
14
