69
3
Award BIOS Setup Utility
3.1.4.4 Init Display First
This field is used to select whether to initialize the onboard VGA,
AGP or PCI first when the system boots.
Onboard/AGP When the system boots, it will first initialize the
onboard VGA or AGP.
PCI Slot When the system boots, it will first initialize PCI.
3.1.4.5 OnChip USB Controller
This field is used to select the USB ports you want Enabled.
3.1.4.6 USB Keyboard Support
By default, USB Keyboard Support is Disabled. However, if you are
using a USB keyboard under DOS, make sure to enable this
function.
3.1.4.7 IDE HDD Block Mode
Enabled The IDE HDD uses the block mode. The system BIOS
will check the hard disk drive for the maximum block
size the system can tr ansfer. The block size will depend
on the type of hard disk drive.
Disabled The IDE HDD uses the standard mode.