Installation and Setup

2

Items Required for Installation - IMG 1010

Topic Location: IMG 1010-Installation and Setup Guide > IMG 1010-Introduction

The table below describes the items required for an IMG 1010 and GCEMS Server installation. Certain
models of the GCEMS Server purchased through your Dialogic supplier have software installed, as
indicated.
Item Dialogic
Supplied
Server
Third Party Server
Server
with Linux
Red Hat
Enterprise
installed
Dell 860 Pentium D, Dell 1950
Dell CR100
IMG-EMS-0860R
(Linux Software
Installed)
IMG-EMS-0861R
(Linux Software not
Installed)
IMG-EMS-1950R
(Linux Software
Installed)

IMG-EMS-1951R
(Linux Software not
Installed)
Third party servers must meet the
following minimum requirements for
a single IMG 1010 configuration:
See Dell Server Configuration Details
Hardware
Keyboard
Mouse
Monitor
Not Supplied by
Dialogic
Not Supplied by Dialogic
IMG
System
Software
IMG 1010 =
img1010_ver1010xxx_id0101.bin
Factory-Installed
On software CD included with
shipment.
GCEMS
Software

IMG_<software_version>.bin
(Ex: IMG_10.5.0.152)
IMGUserInterface_<software_ver
sion>.bin
Factory-Installed
On software CD included with
shipment.
Remote
Monitoring
VNC Monitor Software
Factory-Installed
Obtain updates
from RealVNC.
Installed with Linux Red Hat but
not enabled.
Install
Scripts

- xldhcp
- xlntp
- lnimg
Factory-Installed
Installed into following
directory:
/opt/cantata/common/osconfig
(10.3.x-10.5.0)
or
/opt/dialogic/common/osconfig
(10.5.1+)
Operating
System
RedHat Linux 3.0 ES, (Kernel 2.4)
RedHat Linux 4.0 ES, Nahant
Update 6.0 (Kernel 2.6)
RedHat Linux 5.0 ES, Tikanga
Update 1.0 (Kernel 2.6)
NOTE: (RedHat ES 5.1
Software 10.5.0 ER2 +)
Factory-
Installed:
RedHat 4.0
Nahant Update 6
Obtain Linux Software via
RedHat web site.
Obtain updates via RedHat web
site.
IMG
License

<chassis serial number>-
<timestamp>.cfg
Sent separately
by your supplier.
Sent separately by your
supplier.