Dialogic IMG 1004 Connecting DC Power - IMG 1010

IMG 1010 - Hardware Installation
19
Connecting DC Power - IMG 1010
Topic Location: IMG 1010-Installation and Setup Guide > IMG 1010-Hardware
Installation
The IMG 1010 supports a DC input power option that supports both domestic and international
customers.
Docking Station:
The DC docking station provides a DC power module with two -48 VDC input power terminals
and two ON/OFF circuit breakers. You can select either a single non-redundant power source
or dual redundant power sources.
Power Specifications:
DC Voltage Operating Range
Power - 48 Volts Nominal /
7amps
-40 - to -60 vDC
-48 Volt Connections
When connecting -48 Volts to the IMG 1010 follow the table and diagram below
14 AWG Machine Tool
Wire (MTW)
Blue = -48 volts White = -48
volt return
DC Power Module Plugs Dialogic Supplied