FM Radio Receiving Function
※Reference : Works only on FM radio applied model.
※It's convenient to listen to broadcast with auto seek function.
If FF key or REW key is pressed over 0.5sec after setting to radio, it stops at a receiving frequency. Auto seek function will not give you precise broadcast frequency. At this situation, use REW or FF key for precise control.
●Configuring radio channel
①Select radio mode by pressing radio button.
②Frequency will appear on LCD. Select desired frequency using FF/REW KEY.
●Storing Channel
Select radio mode by pressing radio button.
①Frequency will appear on LCD. Select desired frequency using FF/REW KEY.
②When you press PLAY/STOP button 01 will blink where FM is indicated. Now use FF/REW KEY to select channel
※Confirming stored channel
When menu button is pressed 'Preset Mode' will be displayed then it will show stored channel and frequency.
Now use FF/REW KEY to select stored channel. When menu button is pressed from channel confirming mode, it will go back to FM frequency mode with 'Frequency Mode' displayed.
●Recording radio broadcast
①Select desired recording radio channel through same step from radio channel configuring step1~2.
②Press record button to start recording. Now recorded messages will be stored in index of voice next to last stored message. Message can't be increased during recording procedure. So, you have stop and start recording again.
Checking recording data during record is impossible and it can be checked from voice property after it's stopped.
