DiBoss LT-40T6MVH, LT-40H6MVH manual Out, Component 1 in / Component 2

Externalt r l

Equipmenti t Connectionti

You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below.

A/V OUT

1Connect the Audio outputs(L, R) of the TV to Audio-IN(L, R) of another displayer or the amplifier system.

- If you connect the amplifier system, you can also play the TV sound through the stereo amplifier system.

2Connect the Video output of the TV to Video IN of another displayer.

COMPONENT 1 IN / COMPONENT 2 IN

1Use a component video cable to connect the DVD player’s Y/Pb/Pr jacks to the TV’s, Y/Pb(Cb)/Pr(Cr) jacks.

Note

The Y/Pb/Pr jacks on your DVD player are sometimes labeled Y/Cb/Cr or Y/B-Y/R-Y. If so, connect the cables to like colors.

2Use an audio cable to connect the DVD player’s Audio OUT jacks to the TV’s Audio IN jacks. Be sure to use the upper side of inputs that you used for the video connection.

3Use the TV/AV button to select COMPONENT1 (or COMPONENT 2) mode.

37