Connectingti
thet PC as a monitorit r
Setup
This function is to adjust picture to left/right and up/down as you prefer.
1 Press the MENU button.
2 Select the Setup menu.
3Press the CHx/CHy button to select the desired item.
4Press the Ïq button to make desired adjustment.
5Press the TV/AV button to exit menu
This function is to adjust picture to left/right as you prefer.
This function is to adjust picture to up/down as you prefer.
Phase
This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Clock
This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change.
Note
This mediation range is different according to the supported resolution.
Reset
This function allows you to return to the good picture reproduction programed at the factory and cannot be changed.
Auto
This function is for the automatic adjustment of the screen position, clock and clock phase. The displayed image will disappear for a few seconds while the
1 Press the MENU button.
2Press the CHx/CHy button to select the Auto. Then press the Ïq button.
Note
Some signal from some graphics boards may not function properly.
If the results are unsatisfactory, adjust your monitor’s position, clock and clock phase manually.
41
