Digi MIL-3200X manual Introduction, Configuration, Versions of the Micro Modules

Models: MIL-3200X

1 36
Download 36 pages 46.72 Kb
Page 18
Image 18

M

I

C R O

M O D U L E S

Chapter 3

3.1 Introduction

Each version of the MIL-3200X has its own type of micro module for its network connection:

MIL-3210X: Has the MIL-4310M micro module on-board. The MIL-4310M has an RJ-45 connector (Unshielded twisted pair).

MIL-3220X: Has the MIL-4320M micro module on-board. The MIL-4320M has a BNC connector (thin COAX).

MIL-3230X: Has the MIL-4330M micro module on-board. The MIL-4330M has an ST connector (fiber optic).

Each micro module can be swapped so that the user can change the network connection. However, always power down the device before swapping a micro module. FastPort is not capable of “hot-swappable” maneuvers.

3.2 Configuration

The micro modules come with five different type of connectors: RJ-45, ST, SMA, AUI, and thin COAX (BNC). Refer to the MIL-4300M Series of Micro Modules Installation Guide for configuration and specification information.

3.3 Versions of the Micro Modules

Versions of MIL-4300M series of micro modules supported by the MIL-3200X series, includes:

MIL-4310M: 10BASE-T, with an RJ-45 connector (versions C, D and E)

MIL-4320M: 10BASE2, with a COAX (BNC) connector (versions A and B)

MIL-4330M: 10BASE-FL multi-mode, with an ST connector (versions A and B)

3-2

MIL-3200X Series of FastPort Print Servers

Page 18
Image 18
Digi MIL-3200X manual Introduction, Configuration, Versions of the Micro Modules