Digicom ED-20 PPP installation manual Firewall Settings, Firewall Mode, IP Address

1

2

3

4

5

. . .

8.1.1.6 Firewall Settings

Firewall Mode

1Off / Pass / Block Disables or enables the Firewall mode and selects if the firewall

shall work in Block or Pass mode. See 8.2.5

Firewall Settings
2	IP Address	Set the source and destination IP addresses that shall be allowed
		to pass through the ED-20, or set the source or destination IP
		addresses that shall be blocked from passing through the ED-20.
3	Add>>	Adds the values IP Address and Connect message to the
		Firewall entry list.

4Remove … Remove marked entry from entry list.

5	Firewall Entry List.
	Displays the Firewall entry’s: IP Address.
	Up to 32 entry’s can be added.

22 6609-2221