Digicom ED-20 PPP Default 57 600 bit/s, Allowed values LL, Pstn Default Pstn

8.2Configurable parameters 8.2.1 Serial interface

Communication

Data Rate

The data rate can be set from 1 200 bit/s to 115.2 kbit/s.

Allowed values:

1 200, 2 400, 4 800, 7 200, 9 600, 14 400, 16 000, 19 200, 38 400, 56 000, 57 600 and 115 200 bit/s.

Default: 57 600 bit/s.

Flow Control

Flow control can be chosen between none or RTS/CTS.

If the RTS/CTS being used then the cable must have all interconnecting wires between the ED-20 and the modem connected and the modem shall have the flow control enabled.

Allowed values: None, RTS/CTS

Default: RTS/CTS.

8.2.2 Modem settings

General

The general settings is used to set the fundamental modes of the ED-20.

Modem Connection

Type of modem connection can be selected between PSTN (Public Switched Telephone Network) and LL (Leased Line).

PSTN shall be used for dial-up/dial-in connections with PSTN, ISDN or GSM modem. LL shall be used in fixed connections, e.g. short-haul-, fibre-, LL-, or Radio-modem.

In LL mode the unit will not use any modem AT-commands, Modem escape sequence, AT-commands and the Brouter function will be disabled.The modem will be handled as a transparent connection.

Allowed values: LL, PSTN

Default: PSTN.

6609-2221 23