Installation
SET UP
If TV is connected to an antenna, you’ll need to set a few important items in the menu system the first time you turn on your Display.
Auto scan:
This part of the setup allows the TV tuner to search for all channels viewable though your antenna or cable TV system (when there is no cable box connected).
Press “MENU” on Remote or TV’s front panel to view OSD- “TV Parameters”.
Pressf button 3 times to highlight the fifth item “Channel Settings”.
Press “ENTER” to select “SYSTEM” and select system (Antenna/Cable), then confirm with “ENTER”.
Select “AUTO SCAN” and select “YES” to begin the auto channel search.
(Press “MENU” at anytime to stop auto scan function)
Ch. Edit (Channel Edit):
While in the “CHANNEL SETTINGS” select “CH. EDIT” to add additional receivable channels and erase unwanted channels during Up/Down tuning.
13
