Digimate DGL32 manual Do not attempt to service the Display yourself

Models: DGL32

1 26
Download 26 pages 39.51 Kb
Page 4
Image 4

TO PREVENT POSSIBLE DANGER, ELECTRIC SHOCK, AND OTHER INJURIES WHEN HANDLING YOUR DISPLAY, PLEASE BE AWARE ALL WARNINGS AND SAFETY PRECAUTIONS CONTAINED AS BELOW.

Never Insert anything into DISPLAY!!

Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts.

Never spill liquid of any kind on the Display

Do not attempt to service the DISPLAY yourself!!

Opening or removing covers may expose you to dangerous voltages and other hazards. Refer all servicing to qualified service personnel.

Do not touch your DISPLAY and antenna during thunderstorms!!

Unplug the Display during thunderstorms or if it is not going to be used for an extended period.

Failure to do so may result in electric shock or fire.

ATTENTION!!

Unplug the DISPLAY from the wall socket before cleaning.

Use a damp cloth for cleaning.

Do not use liquid or aerosol cleaners.

Well ventilation is required!!

To ensure reliable operation of the product and to protect it from overheating, the ventilation must not be blocked or covered.

The display should be no less than 4 inches from the wall, and always keep the vent clean.

Do not place your DISPLAY in a cramped and inadequately ventilated place. Avoid placing your DISPLAY upside down at any time.

Note:

1.Read all safety and operating instructions before operating your new Display.

To ensure good ventilation, a distance of more than 4” shall be maintained between the Display and any other furniture.

2.The operating temperature for this Display is 5 ~ 35 °C, storage temperature is 0 ~ 60 °C

3

Page 4
Image 4
Digimate DGL32 manual Do not attempt to service the Display yourself