Digimerge DNS1010 manual Ddns SET-UP and Registration, Port Forward your Router

5

Continued

DDNS SET-UP AND REGISTRATION

E	An Automated Confirmation email will be sent
	to you. Make sure to Record the following
	information.
	• Your account name is: (e.g.) myhouse1
	• Your account password is: (e.g.) password
	• Your Digimerge license number is: (e.g.)
	IPNC-000000000000
	You can visit http://ddns.digimerge.net to
	change your account information and to set
	up additional Digimerge devices.
	Set up your IP product to use this service as
	follows:
	1. Use a web browser to access the Settings
	screen of the camera.
	2. Select the Network Services tab.
	3. Enter the following settings:
	DDNS Domain: myhouse (.digimerge.net)
	Account Name: myhouse1
	4. When you have finished entering the
	correct information for the DDNS service,
	check-on the ‘Enable Digimerge Dynamic
	DNS Service’ checkbox.

NOTE: Please note that normal latencies in the update protocol and Internet propagation delays require you to wait between 5 and 15 minutes and sometimes even longer for your network URL to become fully available and operational over the Internet. This is normal for the DDNS system. Attempting to use the URL within the first 5 minutes of registration may also prolong the URL update time.

The URL for accessing your video is: (e.g. myhouse.digimerge.net). When setting up Internet Explorer for remote access, use this URL in place of the IP Address.

If you set up a router for port forwarding to your IP Product, note that the default web port is 80 and the default streaming video port is 554.

For more information, please refer to the owner’s manual.

myhouse1

To verify that your camera is properly set up for DDNS, click on the ‘register with DDNS service’ link. This will bring up the Digimerge DDNS Account login screen. Log in using the account information given above and then click on the ‘System Logs’ link on the left hand menu. If the Recent Activity log includes the message ‘Automatic IP update’ and the date/time of the message is very recent, then your camera has updated the server correctly.

w w w .d i g i m e r g e .c o m

F	Port Forward your Router:
	You will need to Forward ports
	554 (default video port), 80
	(default web port). All routers
	are different. To Port Forward
	your Router: Refer to your
	Router’s manual for specific in-
	structions on port forwarding or
	check DNS1010 product page
	on Digimerge website

www.digimerge.com

to view the router configuration guide.

DNS1010_Quick Installation Guide_En_R1 Page 13