Digimerge DNS1010 manual C1 Optional, View Live Image

3

Continued

C1 OPTIONAL

Edit Network Parameters: The Network Parameters are automatically assigned to the Device by the network router (by using DHCP). These settings can be manually changed if desired.

1.Select the IP device you would like to edit by clicking on its icon.

2.Click on the MENU button or right click the icon for the device to access the menu. Select “Edit Network Parameters” from the menu.

3.Make the necessary changes and click OK to save changes or click CANCEL to close the window without saving any of the changes made.

NOTE: If a user name and password were set-up on the IP Device previ- ously, you will be required to enter this authentication information when attempting to access the device.

C2

View Live Image:

View live video from the IP Device using the Apple Quicktime program. If this application is not installed on your system, please download it (no charge) at http://www.apple.com/quicktime

If by clicking VIEWING LIVE IMAGE the image is not automatically shown in Quicktime, follow these steps in Quicktime:

1.Go to FILE

2.Choose OPEN URL

3.Enter the following: rtsp://<device IP address> (i.e. rtsp://192.168.2.102) A device IP address can be obtained from the Digiconsole device list.

SOFTWARE SET-UP

NOTE: Minimum Quicktime version installed should be 7.1.6. If you cannot install Quick- time, use Microsoft Internet Explorer to view the device. See step C3 for details.

w w w .d i g i m e r g e .c o m

DNS1010_Quick Installation Guide_En_R1 Page