Extension lead (for speed signal)
This product
Note:
Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another
product, refer to the supplied manuals of both prod-
ucts and connect cords that have the same function. Power cord
For information on other leads ☞ See Page 9.
Violet/white (REVERSEGEAR SIGNAL INPUT)
English
Español
This is connected so that the navigation system can detect whether the vehicle is moving forwards or backwards. Connect the violet/white lead to the lead whose voltage changes when the shift lever is put in reverse. Unless connected, the sensor may not detect your vehicle traveling forward/backward properly, and thus the position of your vehicle detected by the sensor may be misaligned from the actual position.
Note: When you use the
When you use a rear view camera, please make sure to connect this lead. Otherwise you cannot switch to rear view camera picture.
☞See Page 15.
Be sure to use only the supplied extension lead. Use of another lead could cause fire, smoke and/or damage this product.
Connection method
Clamp the reversing lamp lead.
Clamp firmly with
Reversing lamp lead
Deutsch Français Italiano
Extension lead
Fuse resistor
5 m (16 ft. 5 in.)
(for reverse signal)
Check the position of your vehicle’s reversing lamp (the one that lights up when the shift lever is in reverse [R]) and find the reversing lamp lead in the trunk.
Nederlands
12