move the cursor
select the searching parameters
and type
exit from the menu screen
start the Automatic search
return to the previous menu
input the symbol rate directly
31
C. Automatic Search
When you enter the Satellite Name that is set in Antenna
Setting menu, search all of the selected satellite without
inputting the extra frequency.
Antenna Alternative
Select the target antenna for automatic service search.
The attribute of this antenna alternative number is already set
in Antenna Setting menu and the satellite name is helpful in
the selection of the antenna, but in this menu you cannot
change the satellite name.
Searching Mode
You can select one of two modes (Quick or Detail).
When you select Quick mode, it searches the service by
search parameters that is preset.
When you select Detail mode, it searches the service
through all field of tuner(950-2150MHz).
Detail Mode
The pre-fixed symbol rate list is changed according to
antenna alternative and satellite name. If you want to add or
change it, press the (red) key. The picture of the symbol
rate Add/Change mode is as follows:
1. You cannot change or delete the grey coloured part of the
above box that marks symbol rate.
2. You can add, delete or change the white coloured part of
the above box that marks the symbol rate.
3. To add the symbol rate, move the cursor to blank box and
input the symbol rate that you want to add using the 0 ~ 9
keys.
4. Press the OK key to confirm.
5. If you want to go back to the previous figure during
inputting of symbol rate, press the key.
To change the symbol rate, move the cursor to the position
that you want to change and input the new symbol rate.
To delete a symbol rate in the above list, press the Red
key in the selected position and then the symbol rate dis-
appears. The range of symbol rate that is input
additionally is 16-30Ms/s.
6. Press the EXIT key to return Automatic Search menu.
i
Guide of
Main Menu