32
Automatic Skip
Option to search only Free-To-Air services.
The picture on the right tries to search with varying
frequency, symbol rate and FEC etc.
Note: But, the user should select the satellite name in Antenna Setting
menu and when the user inputs the satellite name separately, you
should select the Detail mode.
Press the OK key anywhere to start automatic search.
The picture during searching is as follows.
The right picture tries to search with varying frequency,
symbol rate and FEC etc. Satellite name is the name that
the user selects to correspond with antenna alternative of
antenna setting. The bar graph that displays on the bottom
of picture shows the progress extent with percent (%).
During the search, services that are found are displayed as
follows:
1. Press the EXIT key during automatic search to stop
search.
2. When finishing search, the message that it is finished
appears.
3. Press the OK key to return Service Search menu.
3-4. Satus
A. STB Status
Displays the information of H/W version, S/W version,
Loader version of STB.
B. Signal Detection
Shows the Signal Level (AGC level) and Signal Quality
(BER) of the
current service and is help to the initial
antenna setting.
Guide of
Main Menu