DigiTech MP 600-9000 DVI Important notes, Please read these instructions before using the device

2 Important notes

Please read these instructions before using the device!

Be sure to observe chapter 2.1 Technical data

•This computer is a mounting part! The mounting has to be carried out in accordance with DIN EN 60950, VDE 0160, VDE 0113 and VDE 0750 (DIN EN 60601-1).

•The computer corresponds to class of protection 1.

The PE conductor of the supply connector is connected to the metal housing of the device.

•In order to switch the device to a deenergised state, the supply voltage connector has to be removed.

•The device may only be opened by qualified personnel. See chapter 4 Mounting, installation

•The short-stroke keyboard and display integrated in the flat display computer do not comply with the ergonomics directive ZH 1/618. The keyboard and display only are designed for short-term entries and control functions.

•The sealing ring of the front panel of the flat display computer is to be protected against UV radiation when stored.

•In the case of a defect the device is to be returned to the manufacturer with the following address (for reshipment, please use the original packaging!):

Lenze Digitec Controls GmbH, Germany

Grünstraße 36 • 40667 Meerbusch

Phone +49 – 2132 / 9904 – 0

Homepage: http://www.lenze-digitec.de

E-mail: digitec@lenze-digitec.de

29