3.3.3USB out (downstream)
The computer has two USB 1.1 connections (type A). The USB version depends on the board used.
The connector has the following pin assignment:
PIN | Signal |
1 | +5V |
2 | /USB |
3 | USB |
4 | GND |
Maximum current load per connection: 500mA
3.3.4DVI connection
The monitor panel has an integrated
The connector has the following pin assignment:
PIN | Signal |
1 | TMDS Data 2 - |
2 | TMDS Data 2 + |
3 | TMDS Data 2 Shield |
4 | No connection |
5 | No connection |
6 | |
7 | |
8 | No connection |
9 | TMDS Data 1 - |
10 | TMDS Data 1 + |
11 | TMDS Data 1 Shield |
12 | No connection |
13 | No connection |
14 | +5 V Power (Out) |
15 | Ground |
16 | Hot Plug Detect (In) |
17 | TMDS Data 0 - |
18 | TMDS Data 0 + |
19 | TMDS Data 0 Shield |
20 | No connection |
21 | No connection |
22 | TMDS Clock Shield |
23 | TMDS Clock + |
24 | TMDS Clock - |
25 | No connection |
26 | No connection |
27 | No connection |
28 | No connection |
29 | No connection |
39