DigiTech RP21D manual DlyA DlyB Balance, OutA PanA OutB PanB

RP21D User’s Guide Section Two - Editing Functions

			1					2	￿
	￿		DlyA				DlyB Balance
			%kHz		￿￿	%kHz		%kHz	%kHz
			1 50 msdB 2			msdB 3 100msdB 4			0 msdB
	4		LINK CHANGED	LINK CHANGED			LINK	LINK
			COMP	WAH	TUBE	EQ GATE
	FACTORY USER	SEAMLESS			DIST	EQ	#DIGITAL
	BANK ￿
3		b
	PAGE 4 OF 5						CLIP		L/R OUTS

The display is now telling you three more things about the Chorus parameters.

1.The Dual Chorus has two delay circuits. This is the delay time of the first delay in the Chorus effect. The number one icon is indicating that you must press the number one button to access the Delay A parameter. You can then rotate the Data Wheel to change the Delay time of the first Delay.

2.This is the delay time of the second delay in the Chorus effect. The number three icon is indicating that you must press the number three button to access the Delay B parameter. You can then rotate the Data Wheel to change the Delay time of the second Delay.

4.There are 5 pages of parameters associated with the Chorus, and you are currently on the fourth page. Pressing the Next Page button will advance to the fifth page.

Once the fifth page of parameters has been accessed, the display will look something like this:

1

2

3

4 ￿￿

￿

OutA

PanA

OutB

PanB

1

%

kHz

2

%kHz

3

%

kHz

4

%kHz

100msdB

￿L99msdB

100msdB

r99msdB

4

LINK CHANGED

LINK CHANGED

LINK

LINK

COMP

WAH TUBE

EQ

GATE

FACTORY USER

DIST

EQ

SEAMLESS

#DIGITAL

5

BANK

b

PAGE 5 OF 5

CLIP

L/R OUTS

The display is now telling you five more things about the Chorus parameters.

1.This is the Output Level of the first Chorus circuit in the Dual Chorus effect. The number one icon is indicating that you must press the number one button to access the Output Level A parameter. You can then rotate the Data Wheel to change the Output Level of the first Chorus circuit.

2.This is the Pan position of the first Chorus circuit in the Dual Chorus effect. The number two icon is indicating that you must press the number two button to access the Pan A parameter. You can then rotate the Data Wheel to change the Pan position of the first Chorus circuit.

3.This is the Output Level of the second Chorus circuit in the Dual Chorus effect. The number three icon is indicating that you must press the number three button to access the Output Level B parameter. You can then rotate the Data Wheel to change the Output Level of the second Chorus circuit.

4.This is the Pan position of the second Chorus circuit in the Dual Chorus effect. The number four icon is indicating that you must press the number four button to access the Pan B parameter. You can then rotate the Data Wheel to change the Pan position of the second Chorus circuit.

5.There are 5 pages of parameters associated with the Chorus, and you are currently on the fifth page. There are no more parameters associated with the Chorus effect. Pressing the Next Page button will return to the first page.

Like the Preamp effects, every Digital effect includes user defaults which can hold your favorite settings for quick recall. The procedure for storing defaults to the Digital effects is the same as for the Preamp effects defaults. See page 21 for more information on storing a default to an effect.

27