![](/images/new-backgrounds/1250509/25050979x1.webp)
| RP21D User’s Guide | Section Two - Editing Functions |
|
| |
Pan | Controls the stereo soundfield placement of the delay. Ranges from | |
Out L - R | Adjusts the left or right output level of the Delay. Ranges from Off to 100%. |
|
Out A - B | Adjusts the output level of delay voice A or B. Ranges from Off to 100%. |
|
Pan A - B | Controls the stereo soundfield placement of delay voice A or B. Ranges from | |
Out C - D | Adjusts the output level of delay voice C or D. Ranges from Off to 100%. |
|
Pan C - D | Controls the stereo soundfield placement of delay voice C or D. Ranges from | |
Out LA - LB | Adjusts the |
|
Out RA - RB | Adjusts the | |
Out LC - LD | Adjusts the |
|
Out RC - RD | Adjusts the |
Multi Effects Modules - Chorus/Delay and Flange/Delay
The RP21D Multi Effect Modules allow the User to combine either Delay and Chorus or Delay and Flange within one Effect module block. This is ideal for situations where the User needs to add another effect to the Effect Configuration, but is running low on signal processing resources. Within the module, there is a unique parameter that allows you route the signal several different ways between the two effects.
Multi-Effect Module Parameters
FX: Lvl | Controls the signal input level fed to the Module. Ranges from Off to 100%. |
Dry: Lvl | Controls the level of the dry (uneffected) signal. Ranges from Off to 100%. |
Balance | Controls the positioning of the dry signal in the stereo soundfield. Ranges from |
Route | Selects the route signal path within the Chorus/Delay, and Flange/Delay Multi effects modules. The 3 settings are: 1) |
| Chorus/Flange into Delay with feedback into the Delay 2) Chorus/Flange into Delay with feedback into Chorus/Flange |
| 3) Delay into Chorus/Flange with feedback thru the Chorus/Flange. |
Speed | Controls the Low Frequency Oscillator (LFO) Speed of the Chorus or Flanger. Ranges from 0.06 to 16.0 Hz. |
Depth | Adjusts the intensity of the Chorus or Flanger effect. Ranges from 0 to 30 milliseconds. |
Feedback (Flanger) Controls how much of the flanged signal is fed back to the input of the Module. The FDBACK Parameter is what gives
| flangers their distinctive voice. Flangers are capable of both positive and negative feedback loops, so experiment to |
| find the sound you like best. Ranges from |
WvFrm | Selects which waveform the LFO follow. Options for this control include: Sine, Triangle, SP1 (Special 1), and SP2 |
| (Special 2). |
35