Dimension One Spas Cove manual Glossary of Terms, Granitex /Quarite Plus Disclaimer, Definition

2002 @ Home Hot Tubs

Owner’s Manual

Granitex /Quarite Plus Disclaimer

This spa is insulated with high-density urethane foam for structural support and energy efficiency. When empty of water and left in the direct sunlight without the spa cover in place, the spa is vulnerable to ultra violet light or solar damage. Temperatures generated by sunlight can become concentrated in the shell surface causing the shell material to delaminate from the urethane foam packing. This occurrence is not covered under warranty. The spa cover must be kept on the spa while empty of water.

Glossary of Terms

Term	Definition
Dry Firing	Turning the heater element on when there is no water in the heater.
Equipment	Provides access to your spa’s equipment for a qualified service technician.
Access Panel
Filter Cartridge	Your spa’s filters have been designed so that you may repeatedly clean and maintain the
	filter element as needed. The element is constructed of woven polyester rather than
	paper to ensure long life and proper filtration.
Floating	Removes floating debris from the water surface. This inlet provides a water return path
Skimmer	to your spa’s equipment and flow through the filter element.
GFCI-Ground	A type of Circuit Breaker that automatically disconnects power to the spa when there is
Fault Circuit	an electrical power leakage to ground.
Interrupter
Gravity Drain	Used to drain your spa
Valve
Halogens	Free chlorine, bromine or iodine ions that are very strong oxidizers used to sanitize
	water.
Jets	Return the water into the spa from the equipment. The jets produce a turbulent flow of
	water mixed with air to provide a concentrated body massage
Light	Illuminates the spa
Lower Control	The electronic control system that governs all of the electrically operated components
System	of your spa utilizes an advanced microprocessor and solid-state electronic devices to
	activate all user and maintenance options. A backlit, highly reliable liquid crystal display
	gives you a complete update of the spa status at any time of the day or night.
	Temperature setting, as well as control of the light, jets, filtration, and time of day
	display, are all instantly available from, and controllable at, the topside control panel.
Pressure Switch	Safety device(s) that sends a signal to the electronic control system that there is
	adequate water flow to turn the heater on.
Pump	Produces water flow through the heater, filter, sanitation system and the main jets in the
	spa. The pump will operate automatically during filtration and heat cycles. This pump can
	also be operated manually by depressing the “jets” pad on the topside control panel
	which will allow you to choose between two speeds
	Low speed for efficient water circulation during heating and filtration modes, and for
	gentle jet resistance or massage action.
	• High speed for maximum jet action.
Selector Valve	Located on the top edge of the spa, it diverts jet power from one area of the spa to
(Cove model	another.
only)
Serial Number	Please use the serial number (located on right corner of the pedestal) in communication
	with your dealer.
Temperature	Measures the temperature of the water inside the spa. This temperature sensor is used
Sensor	to control the spa heater and the temperature is displayed on the spa side control panel.
Top Side	Used to control temperature, pumps for jets, spa light, system clock, automatic filtration

19