8 www.dimplex.com
Fireplace Installation
the replace (Figure 2).
Place the Front Glass onto 5.
the track of the replace
(Figure 2) and slide it along
the front until it reaches the
far left of the unit.
re-attach the right hand trim 6.
piece using the three (3)
Philips screws from step 4.
Site Selection and Preparation
This section provides instructions
for selecting a location and
preparing the site to install the
replace into your Dimplex mantel
surround.
select a suitable location that 1.
is not susceptible to moisture
and is away from drapes,
furniture and high trafc.
For ease of electrical hook 2.
up you may wish to locate
the replace near an existing
outlet (refer to noTE 1).
store the replace in a safe 3.
dry and dust free location.
CAUTION: Clearance for
air circulation beneath the
replace is provided by two
(2) spacers. Do not install
replace directly on carpet
or similar surfaces which
may restrict air circulation.
If installing the replace in a
carpeted area, place a one-
piece, solid at surface under
the replace. Ensure that
all feet rest securely on this
surface.
! NOTE: The dimensions of
the replace with the trim are
27 ⅜ inch (695 mm) wide x
23 ½ inch (596 mm) high x
8 3/4 inch (222 mm) deep.
Figure 3 27 ⅜”
(695 mm)
22 ⅞”
(580
mm)
23 ½”
(596 mm) 8 ¾”
(222 mm)
26 ¼”
(663 mm)