QUICK REFERENCE GUIDE FOR THE DIMPLEX ELECTRIC FIREPLACE
1.Prior to the first use of the fireplace verify the following:
•Are the circuit breakers for the socket the unit uses on?
•Are the light bulbs in your fireplace loose? (to check, follow the instructions for replacing the light bulbs under the maintenance section of this manual)
2.The heater on your fireplace may emit a slight, harmless odor when first used. This odor is a normal condition caused by the initial heating of internal heater parts and will not occur again.
3.The information regarding the model of your fireplace can be found on the rating plate. See Page 2 for location.
4.If you have any technical questions regarding the operation or service of your fireplace have your Model and Serial Number ready, and contact Dimplex North America technical support at
CONTENTS
PAGE 1 | Important Instructions |
PAGE 2 | Model and Serial Number |
| Information |
PAGE 3 | Site Selection and Preparation |
PAGE 4 | Fireplace Installation |
PAGE 5 | Operation |
PAGE 13 | Maintenance |
PAGE 16 | Warranty |
