Operation
Electric Fireplace Manual Control
The manual controls for the fireplace are located in the upper right hand corner (Figure 4).
Figure 4 |
|
|
|
|
|
|
|
| Main |
|
|
|
| On/Off |
|
| Initialization | Switch | |
|
| Button |
|
|
SERIAL No. | XX | Indicator | 3 Position |
|
XXX |
| |||
|
|
| ||
|
| Light | Manual |
|
|
|
| Control |
|
Main On/Off Switch
Supplies power to the 3 Position Manual Control Switch.
3 Position Manual Control Switch
Remote (left position): The unit is operated with the remote control.
Flame (center position): The flame effect is turned on.
Flame & Heat (right position)*: The flame effect and heater are turned on simultaneously. When the manual control is in the Flame
&Heat position the heater does not run on the remote operated thermostat. When the heater is on the red indicator light is activated on the firebox and the fan and heater are running on low.
!NOTE: When the manual control switch is in the Flame and Flame & Heat positions, the fireplace unit will not operate with the remote control.
10
