x 1 inch rated at MERV 10. If using an after market filter follow the manufacturers recommended replacement instructions.
To replace filter: |
| ||
1. | Open the | Figure 11 | |
| doors. | ||
| Air Filter | ||
2. | Remove the three | ||
Bracket | |||
| (3) mounting screws | ||
| from the Air Filter |
| |
| Bracket. |
| |
3. | Remove the Air |
| |
| Filter Bracket |
| |
| assembly from the | Mounting | |
| firebox. | ||
| Screws | ||
4. | Slide Filter out of Air |
| |
| Filter Bracket. |
| |
5. Replace filter and reassemble in reverse order as above.
!NOTE: If after market air filter is used ensure it is installed according to the manufacturer’s recommended instructions.
Glass Cleaning
The glass is cleaned in the factory during the assembly operation. During shipment, installation, handling, etc., the glass may collect dust particles, these can be removed by dusting lightly with a clean dry cloth.
To remove fingerprints or other marks, the glass can be cleaned with a damp cloth. To prevent scratching, do not use abrasive cleaners or spray liquids on the glass surface.
Fireplace Surface Cleaning
Use a cloth dampened with warm water only to clean painted surfaces of the electric fireplace. Do not use abrasive cleaners.
19
