7.Do not connect the yellow wire and red wire together of this product directly to the +12V. Connect the red wire of this product to the ACC of the ignition key switch and yellow wire to +12V.

Failure to do so may result in discharge of the battery.

8.Only supplied accessories should be used to avoid damage to the unit during installation.

9.Ensure that the display monitor is suitably installed at a location, such that it will not obstruct the rear view mirror and/or the air condition vents or operation of a sunroof.

10.Do not install this unit at a declining angle exceeding 30 degrees.

11.Do not install screws over the plane surface, which may affect the LCD screen deployment or

retract function.

ELECTRICAL CONNECTIONS

Power Cable (4–pin, one pin not used)

 

Color Code

 

Function

 

 

 

 

 

Black

 

This wire is the ground source for the monitor and DVD.

 

 

 

 

 

Red

 

Accessory +12V switched power source for the monitor and DVD. This

 

 

wire supplies the main power to the system (0.5A fuse).

 

 

 

 

 

 

 

 

Yellow

 

Constant +12V power. This wire supplies power to the DVD for last

 

 

position memory (3A fuse).

 

 

 

 

 

 

 

Dome Light Cable (3–pin)

 

 

 

 

 

 

Color Code

 

Function

 

 

 

 

 

Black

 

This wire supplies the ground to the domelight circuit.

 

 

 

 

 

Yellow

 

This wire supplies +12V constant power to the domelight circuit.

 

 

 

 

 

Gray

 

This wire connects to the (-) door trigger.

 

 

 

 

© 2005 Directed Electronics, Inc.

33

 

Page 33
Image 33
Directed Electronics OHD1021A manual Electrical Connections