Wire and Cable Connections
1.Audio out - Use these outputs for stereo audio signal to IR wireless headphones or an FM modulator. The audio zones correspond to the same monitor zones so any time a source is changed the audio will follow.
2.Monitor zones - These
3.ESP/ESP2 Port - This
4.FM Modulator control - This plug is used for controlling power to the RFM100 FM modulator. The MCB1000 will turn the RFM
100 power on/off by the ignition switch or the system operator can turn the FM modulator on/off by remote control.
5.Infrared input - This is a 3.5mm pin plug for a remote IR eye. The optional IR 100 Infrared remote receiver can be added to the system to allow full control from any location in the vehicle.
6.Extended menu switch - Set this switch to the ON position and a special Setup Menu for the installer will appear on screen with the rest of the menus. It is designed allow the installer to customize the system hardware operation, program the Directed ESP/ESP2 security system trigger names, and name the AV zones for the
12 | © 2001 Directed Electronics, Inc. |