ing location. Note the location of the female 20-pin connector.

4.Position the TVM300 over the mounting location and check alignment of the antenna connector slot in the case, the 20-pin connector, and the two machine screw mounts.

5.Carefully align the TVM300 to the 20-pin connector and press down firmly until the TVM300 mounting brackets align with the machine screw mounts.

6.Secure the TVM300 to the circuit board with the supplied machine screws.

7.Verify that the TVM300 is secured and rein- stall the MCB1000 module cover.

8.Complete the installation/reinstallation of the MCB1000. Verify all connections are correct according to the instructions

9.Be sure to attach the TV antenna, then test the system operation.

TV RECEPTION WARNING

Television reception in an automobile is constantly affected due to vehicle movement around obstructions and high-energy sources. Location, weather, automobile construction, and installation can all affect reception.

Possible areas of poor reception include:

■Hospitals

■Military bases

■Airports

■High power wires

■Large buildings

■Distance from transmitter

© 2001 Directed Electronics, Inc.

11