DirecTV DSR 660 manual Setup Wizard, Important note

Setup Wizard

If your equipment has been professionally installed, skip this first time setup section and go to page 19.

After the DIRECTV® Multi-Room Receiver has been connected to your components, it is time to turn the DIRECTV Receiver on.

1.Connect your receiver to the AC output.

2.The Select preferred language menu appears.

3.Use the ▲▼ buttons to select your preferred language of the on screen menus and guide and press OK.

4.When the Welcome screen displays, press the OK button on the remote control to start the Setup Wizard.The Setup Wizard is a first time setup that automatically steps you through the installa- tion process.This screen will ONLY appear the very first time your DIRECTV Receiver is turned on.

a.Enter the ZIP code.

Note: The ZIP code is critical to point your dish accurately (refer to page 32).

b.Configure the dish (refer to page 32).

c.Point the dish (refer to page 32).

d.Test the System (refer to page 33).

5.After you have installed your DIRECTV System, you should contact DIRECTV to order DIRECTV® programming at 1-800-531-5000.

Important note

Some of the menu and/or option screens, such as Setup, Parental Controls, Editing a favorite list, or Messages, cannot be accessed simultaneously from TV1 and TV2. If you try and access one while it is being used at the other TV, a warning will be displayed.

Messages Access Conflict screen

18